What's new

Every firmware release, newest first. Your panel's device page shows the version it runs under Firmware, and offers each new one there.

v2026.11.5

November 19, 2026

The new Smart board shows your own text from Home Assistant, effect playlists step through your effects, and remote buttons can pick live games, any team, a page or a playlist.

All 16 changes
  • ๐Ÿ’ก In Home Assistant, **Power** and **Brightness** are now one light with the panel's name that can join a light group or an area and fade; an automation or dashboard that used either needs the light instead
  • ๐Ÿ  **Smart board** under **Showing**: up to four rows of live text from Home Assistant, any entity or attribute, with color tags like [red]; it can also go up between games under **After the game**
  • ๐Ÿ“ถ **Add network** under **Wi-Fi networks** on the device page saves a network by name and password while the panel stays on its Wi-Fi, and offers to switch to it now when it's in range
  • ๐Ÿ“‰ The panel downloads a fifth of the data from ESPN or less: it asks for the scores compressed, so **ESPN data** on the device page climbs much slower
  • ๐ŸŽ† **Effect playlists**: up to 4 named lists of effects (any name but **None**, the choice that stops one), each one up for 1 second to an hour, in order or shuffled, made on the Customize tab and played from there, the Home tab, a **Remote** button or Home Assistant
  • ๐ŸŽฎ **Live games**, **Scoreboard**, **Clock**, **Smart board** and **Effects** in the **Remote** button pickers: Live games switches the panel back to Live games with the leagues it had, so a favorite's button pressed during Live games is no longer a one-way trip; a page choice puts that page up, and an Effects button keeps its own effect, palette, speed and intensity, set with **Change** under it
  • ๐Ÿˆ The **Remote** button pickers are grouped by sport, with every league: **All NFL live games** follows that league only, leaving your own Live games leagues as they are, and **Another NFL team...** puts any team on a button, marked **Button only** under **Favorites**
  • ๐ŸŸ๏ธ **Sports in playlists**: a playlist can hold whole leagues beside its teams, like NFL plus the Mavericks; it shows those leagues' live games, and its own teams take over while they play
  • ๐Ÿ” A remote button set to a team, playlist, sport or Live games now brings the panel back to the scoreboard when the Clock, Smart board or an effect is up, and ends **After the game**'s clock or Smart board until the next game's final
  • โฑ๏ธ Live games shows a game within seconds of a change or at startup, instead of an empty board for 10 seconds or more while the panel read every league
  • ๐Ÿ“ถ **Forget** on the Wi-Fi network the panel is on moves it to your next saved network right away, instead of staying on the forgotten one until the next restart
  • ๐ŸŽฎ A WizMote paired or unpaired just before a power cut stays that way, instead of the old pairing coming back
  • ๐Ÿช A webhook address no longer takes a little of the panel's memory with every event it posts, which over a week of game days without a restart could run the panel low
  • ๐Ÿ“ถ The round arrow above the app's Wi-Fi list now has the panel look for networks again, so a phone hotspot turned on after the panel started shows up
  • ๐Ÿ”“ After **Reset Wi-Fi** the panel stays in setup for the app instead of joining an open Wi-Fi network nearby that it never saved
  • ๐ŸŒ… A panel turned back on now shows what's current: a Smart board row no longer stays frozen mid-scroll on the text it had when it went dark

v2026.11.3

November 13, 2026

Pick the best game now starts off, so Live games shows a random game until you turn it on. Favorites reach the board faster: several added in a row, or a live favorite with Favorites take over on, shows within seconds.

All 6 changes
  • ๐ŸŽฒ **Pick the best game** in Live games is now off by default, and this update turns it off once; turn it back on under **Live games** on the device page
  • ๐Ÿ“Š The win chance shows after a touchdown, field goal, turnover or a swing of 10 points or more, instead of every few seconds
  • โญ Adding several favorites in a row shows the right game within seconds, instead of waiting behind a schedule card's download
  • ๐Ÿ” Turning on Favorites take over, or adding a favorite while it's on, shows a favorite's game that's on now within seconds, instead of waiting hours when nothing else was live
  • ๐Ÿˆ An interception, fumble or sack celebrates once, instead of again each time ESPN rewrites the play
  • ๐Ÿ’ A hockey intermission stays on the board until the puck drops, records and game leaders included, instead of ending when ESPN puts up the next period's clock early

v2026.11.2

November 11, 2026

Big plays: dunks, interceptions, grand slams, hat tricks and braces get their own pixel-art celebrations. The row under the clock reads in words, and each league tab in the team chooser starts with today's games.

All 7 changes
  • ๐Ÿ“œ New firmware code is open source under GPLv3 instead of MIT, so anyone who builds on it keeps the author's name on it and shares their source; code released before stays MIT
  • ยฉ๏ธ The bottom of the device page names the firmware's author and license
  • ๐ŸŽ† On **Full** celebrations your team's big plays get their own pixel-art scene: dunks and alley-oops, interceptions, pick sixes, fumbles and sacks, grand slams and walk-offs, hockey hat tricks, and soccer braces, hat tricks, penalties and late go-ahead goals, with a **Big plays** switch to turn them off
  • ๐Ÿ”ค On a wide board the row under the clock reads in words in place of the score margin chart and the win chance bar: the win chance ("ND 84% to win") in football and basketball, the last basket, points leaders and playoff series in basketball, shots on goal and the latest goal in hockey
  • ๐Ÿ“‹ Each league tab in the team chooser starts with that league's games today, so you can add a team from its game
  • ๐Ÿท๏ธ A team ESPN has no logo for, like a small college on a Division I schedule, shows its abbreviation in its team color instead of an empty space
  • โญ A favorite you add shows within a few seconds instead of leaving the board empty for about a minute

v2026.11.1

November 8, 2026

Fixes from a full review of the firmware: Wi-Fi and setup, backups, updates, the scoreboard and the device page. Schedule and Season recap come to basketball and hockey.

All 54 changes
  • ๐Ÿ—“๏ธ Schedule and season recap cards now work for NBA, WNBA, NHL and college basketball favorites too, every league but MLB
  • ๐ŸŒ™ On the night the clocks go back, turning night mode off for the night lasts until the real end time, instead of the panel going dark again an hour early
  • โšฝ A cup tie won on penalties after losing the second leg celebrates the right team, on the panel and in Home Assistant
  • โญ A favorite whose game didn't load comes back within minutes instead of staying off the board for up to six hours
  • ๐Ÿ€ Halftime and final leaders with accented names, like Donฤiฤ‡, show their letters instead of empty boxes
  • ๐Ÿ“ฑ The team picker's league tabs fit on a phone, with Done always in reach
  • ๐ŸŽฎ Unpair remote stays unpaired after a restart
  • ๐ŸŽฎ The press that pairs a WizMote does nothing else (pairing with OFF used to turn the panel off), and pressing the paired remote turns Discovery off
  • ๐Ÿ€ In a playoff game the series no longer draws over the score margin chart on a wide board: the series has the row
  • ๐Ÿ’ A hockey record too long for the space under the logo, like 30-12-10, shows as points instead of wrapping
  • ๐ŸŒก๏ธ 100 degrees and up, or -10 and below, fits on a wide weather card instead of losing the degree sign to the edge
  • ๐Ÿˆ Going back to the Scoreboard during a football game no longer draws timeout pips over the field strip
  • ๐Ÿ“Š A board that switches games at halftime or the final starts the new game on its board, not on the last game's line score
  • โœจ Effects no longer starts over the heat or power mark or a Wi-Fi sign-in message, or leaves the panel black when effects could not start
  • ๐Ÿ”˜ The countdown for a Wi-Fi or factory reset shows in front of a banner or the heat mark while you hold the button
  • ๐Ÿงช Turning Follow beta off gets you the release your beta was building toward, instead of waiting for the one after it
  • ๐Ÿ”„ A restart partway through a download no longer marks that release as one that "didn't take", so the panel still installs it on its own
  • ๐Ÿ”„ The device page says when an install fails instead of showing "Installing" for five minutes
  • ๐Ÿ’พ The device page restores its own settings backups again once you have several playlists; it used to call them too big
  • ๐Ÿ’พ Restoring a backup saved in Live games keeps Live games, instead of switching the panel to Favorite teams
  • ๐Ÿ’พ A backup with the same team in two favorite slots restores, with the second slot left empty
  • ๐Ÿ“ถ Tapping Save on the setup hotspot page without picking a network no longer forgets every saved network at the next restart
  • ๐Ÿ—“๏ธ Moving or deleting playlists while a schedule is playing one no longer brings back the wrong playlist when it ends, or wipes every playlist's schedule after a restart
  • ๐Ÿ’ A slow connection can no longer restart the panel while it reads a basketball or hockey favorite's season schedule
  • ๐Ÿ” Changing favorites or the mode while the panel reads a game can no longer crash it
  • ๐Ÿงช Follow beta works on Waveshare boards: they used to find no update at all with it on, stable releases included
  • ๐ŸŽฎ Renaming a playlist keeps the remote buttons set to it, instead of sending them back to their own favorites
  • โญ After a favorite slot is emptied, editing a playlist keeps its teams instead of dropping or swapping them
  • ๐Ÿ“ฑ Field strip, Win chance bar, Score margin, Install updates automatically and Follow beta flip as soon as you tap them on the device page
  • ๐Ÿ“ฑ The brightness slider keeps following changes from Home Assistant after you use it, and a Panel on tap the panel never got goes back
  • ๐Ÿ“ฑ Add a team opens at once instead of waiting on every league's games, and a settings change gives up after 8 seconds when the panel stops answering
  • ๐Ÿ“ฑ A message list or webhook address with accented letters or curly quotes gets a note instead of looking saved
  • ๐Ÿ”„ Check for updates on a panel running a newer beta no longer says an update is available
  • ๐Ÿˆ A very long Last Play shows in Home Assistant instead of "unknown"
  • ๐Ÿ”† The QC and FCC screens stay at full brightness when Brightness changes at night, and QC stays lit when Power goes off
  • ๐Ÿ“‹ The scoring plays on the halftime and final ticker no longer list a score twice when ESPN briefly sends an older copy of the game
  • ๐Ÿˆ A safety after a missed extra point gets its own line in the scoring plays instead of joining the touchdown's
  • ๐Ÿ  Home Assistant's period events name an NHL shootout and soccer's extra time and penalties, instead of calling them overtime
  • ๐Ÿ† Two teams tied for 25th both show on the Top 25 card
  • ๐Ÿ’ฌ A message with a character that isn't valid text no longer keeps the apps from reading the panel
  • ๐ŸŒ™ Night mode turned off for a night that ends between 1 and 2 AM stays off through the repeated hour when the clocks go back
  • ๐Ÿ–ผ๏ธ A looping GIF's first frame keeps its own timing on every pass
  • ๐Ÿ–ผ๏ธ A picture half saved or half deleted when the power went out no longer takes up room after a restart
  • ๐Ÿˆ Field strip, Win bar and Margin spark stay the way you set them when no game is on, instead of switching back in Home Assistant and in backups
  • ๐ŸŒ™ The kickoff forecast shows a moon for evening games in fall and winter, from 5 PM in December, instead of a sun until 7 PM
  • ๐ŸŒก๏ธ After midnight the weather card shows the new day's high and low instead of yesterday's
  • ๐Ÿ’ Hockey's ticker shows the records in the regular season instead of ESPN's season series line
  • ๐Ÿ•ฐ๏ธ The device page picks US Central for a browser in Ojinaga, Mexico, and US Mountain for one in Ciudad Juรกrez
  • ๐Ÿ“ถ A new password for a saved network, typed on the setup hotspot page, no longer replaces the one that worked until the panel joins with it
  • ๐Ÿ“ถ At start-up the panel looks for all its saved networks on its first Wi-Fi scan, not only the last one set up
  • ๐Ÿ“ถ Forgetting a network, or a failed setup from the app, no longer leaves the panel trying just one saved network until it restarts
  • ๐Ÿ“ฑ The app can find the panel over Bluetooth after a later Wi-Fi drop, even when a phone stayed connected after setup
  • ๐Ÿ“ฑ Setup from the app only reports success once the panel is on the new network, and the network list comes back at once with no Wi-Fi in range
  • ๐Ÿงพ Updates and restarts no longer show up as watchdog crashes in the crash report, and a brownout keeps a saved crash's details

v2026.11.0

November 3, 2026

The device page in five tabs, Game-day wake and After the game, weather, news, the Top 25, game leaders, season cards, your own pictures, Effects, and a build for the Waveshare ESP32-S3-RGB-Matrix board.

All 24 changes
  • ๐Ÿ”Œ The panel no longer dims itself when hot or after a power dip, and the Clear button is gone: a thermometer or plug in the corner says what happened, and after a power dip it starts at half brightness for 3 seconds
  • ๐Ÿ“ฑ The device page has five tabs (Home, Teams, Display, Customize and Device), fits a phone's screen, shows brightness as a percent, and has a light, dark or follow-the-phone look
  • ๐Ÿ” Searching **On now** in the team chooser finds a team that isn't playing today, under a **Teams** heading
  • ๐Ÿ† Game leaders: at halftime and the final the board takes a turn with each team's top players, from the box score. Off under Between games on the device page.
  • ๐Ÿ“… Each playlist can have a schedule (days and hours), keep the panel on its own teams, and its own **Only today's games**
  • ๐ŸŽ›๏ธ Set each WizMote button 1 to 4 yourself under **Remote** on the device page: a favorite, a playlist, a sport, all favorites or nothing; making a playlist no longer moves the buttons
  • ๐ŸŽจ Give each playlist a color and an icon: when a remote button or **Playing** switches to it, the panel shows its name in that color with the icon above
  • ๐ŸŒ™ The remote, a team pick or **Panel on** turns night mode off for the rest of the night
  • โฐ **Game-day wake** turns the panel on before your game, and **After the game** turns it off or shows the clock once the final has been up a while
  • ๐Ÿ”” While a new release waits, the ticker says **Update ready: open the Game Day app** for an hour a day, never during a live game, and **Important update ready** for a release that fixes something broken; the device page's Firmware box says **Important update** too, and its Diagnostics show when the ticker last said so
  • ๐ŸŸ๏ธ Home Assistant gets an event at the start, every score, lead change, period end and final, with both teams' colors, plus a heads-up before the start; the same events can go to a webhook address on your network
  • ๐ŸŒค๏ธ A weather card between games: your town's temperature, today's high and low and the next two days, once you set a town under **Between games** on the device page
  • ๐Ÿ“ฐ A news card between games: ESPN headlines for your teams or leagues, one every 3 minutes, off until you turn on **News headlines**
  • ๐ŸŽต **Playing** has a row for each sport in your favorites, like **All football**, that keeps up with your list on its own; the **One per sport** button is gone
  • ๐Ÿˆ While you follow a college team, the AP Top 25 takes a turn between games every 10 minutes, for college football and basketball
  • ๐Ÿ”ข A college team in the AP Top 25 has its rank on the top corner of its logo, on the next-game card, during the game, and on Live games' Later today and final score cards
  • ๐Ÿ–ผ๏ธ Your own pictures between games: add up to 4 photos or GIFs under **Pictures** on the device page, and a GIF animates
  • ๐ŸŽ† **Effects**, a third page under **Showing**: one of 52 moving patterns fills the panel in place of the scoreboard; the board comes back when you pick the Scoreboard again or when the panel has something to tell you
  • ๐Ÿ—‚๏ธ Between games on the device page is one list with a switch for each card: next game, clock, both countdowns, the message card, pictures, game leaders, Top 25, news and weather
  • ๐Ÿ—“๏ธ Schedule and season recap cards between games: a football or soccer favorite's next three games, and its record and playoff result once its season is over
  • ๐Ÿงฉ A build for the Waveshare ESP32-S3-RGB-Matrix board, the board in ready-made Game Day Scoreboards: the installer now asks for your board first. It hasn't been tested on a real board yet.
  • ๐ŸŽจ A white or pale team's color flash after a score has dark text, so you can read it
  • ๐Ÿ“ถ A new panel goes back to **SETUP** after **Can't join**, not to **Wi-Fi lost**
  • ๐Ÿ“… A New Year's Day game seen on Dec 31 says **Tomorrow**, not a weekday

v2026.10.2

October 28, 2026

Favorite teams replaces My team, with playlists, countdowns to the next game and to your own day, a second try after a wrong Wi-Fi password, and fixes for Bluetooth setup restarts, memory and missed scores.

All 14 changes
  • โš ๏ธ My team is gone: to follow one team, make it your only favorite. A panel that was in My team switches to Favorite teams, so add your team back as a favorite.
  • ๐ŸŽต Playlists: group your favorites, like your football teams, and play just that group
  • โณ Countdowns to your next game, and to a day you pick, like Christmas
  • ๐Ÿ€ Season leaders and the playoff round in the pre-game ticker for baseball, basketball and hockey
  • ๐Ÿˆ Football's ticker starts with the week and shows the forecast at open-air stadiums
  • ๐Ÿ“ถ Wrong Wi-Fi password in the app? The panel says **Can't join** and the app asks again
  • ๐Ÿ“œ The panel can show its FCC information on its own screen
  • ๐Ÿ“ฑ Setup from the app no longer restarts the panel right after it joins Wi-Fi
  • ๐Ÿ’พ Settings are saved the moment you change them
  • ๐Ÿง  Long favorites lists no longer run the panel out of memory
  • ๐ŸŒ **No internet** instead of **Getting ready** when the internet is down
  • ๐ŸŒ™ The night schedule keeps its brightness after a restart
  • ๐Ÿ•› "Tomorrow" turns into "Today" at midnight, and late West Coast games stay in Live games
  • ๐Ÿ–ผ๏ธ A logo that missed its download tries again

v2026.10.1

October 22, 2026

Line scores at halftime and the final, a night schedule, a panel that protects itself when it runs hot or its power is weak, Wi-Fi that rides out power cuts and sign-in pages, and a Diagnostics section on the device page.

All 31 changes
  • At halftime and the final the board takes turns with the line score: each team's points by quarter, period or inning and the total, with runs, hits and errors in baseball. On a 64x64 panel it's a shorter form, by half in football and basketball. With Last play on, the halftime and final ticker also lists the scoring plays the panel saw, like "Q1 7:12 Lamb 12 yd pass, DAL 7-0", and the final adds ESPN's headline for the game.
  • Before a football game the ticker shows each team's passing leader for the season, like "Prescott 1,381 yds 9 TD". A new Pre-game season leaders switch on the device page turns them off. On a single 64x64 panel, which has no room for the records on the board, the pre-game ticker also shows both teams' records.
  • In football, with Last play on, the ticker adds how a scoring drive went next to the play, like "Drive: 4 plays, 58 yards, 1:36". With Pre-game odds and TV on, it also shows ESPN's win chance during the game for the side it favors, like "KC 72% to win".
  • The ticker's "Game situation" switch is now one switch per sport: "Down and distance" for football, "Count and at-bat" for baseball and "Match stats" for soccer. The device page shows only the ones for sports your panel follows, so turning off football's line no longer turns off the baseball count. After the update all three start where your old switch was.
  • A night schedule dims the panel, or turns its screen off, between two times you pick, 11 PM to 7 AM to start. Turn it on in the Panel card on the device page, then choose Screen at night: On at a night brightness of its own, or Off. A live game for your team or a favorite keeps the panel at its normal brightness until the game ends. While it's on, the device page says so, like "Night mode until 7:00 AM". It's off on a new panel.
  • Live games has a new Favorites take over switch: the panel keeps showing the games on, but when one of your favorites is playing, its game takes the panel until it ends, your team on the left. With two favorites playing, it sticks with the one higher in your list or alternates between them every Switch every minutes, your pick under Two favorites at once. It's off until you turn it on.
  • Live games follows the best game on instead of a random one: the closest game with the least time left, with overtime and ranked college teams first, and it moves on only at a break in play. When the better-ranked college team trails late, the panel flashes UPSET ALERT in red over that game. It's on for every panel; turn off Pick the best game on the device page for a random game every Switch every minutes, as before.
  • Back up a panel's settings to a file and load them back: Export settings and Import settings in the Setup card's Backup section on the device page. The file has your team, favorites, modes, ticker switches, night schedule, messages and the rest, not the Wi-Fi networks or the WizMote pairing, so after a factory reset, a replacement panel or a second panel for another room you load it and the panel picks up where it was.
  • The device page's favorites picker stays open so you can add several teams in one go: teams already on the list have a check mark and a tap takes one off again, a line at the top counts them against the limit, and Done closes it. Change team still closes on a pick.
  • Two new switches in the Favorites card. Jump to the action moves the panel to another favorite's game at its big moment, like the red zone, the bases loaded or a close finish, then back; it's off until you turn it on. Score banner, on to start, shows another favorite's score along the bottom for five seconds while one favorite's game is on, like "KC TD, 21-17".
  • Put your own words on the panel from the Message card on the device page: a banner over the board for a few seconds ("Pizza's here!"), or a message card that takes turns with the scoreboard between games and steps aside when a game you follow goes live. Home Assistant can show a banner too, with the Message text entity or the show_message action.
  • A panel with no team picked follows live games in every league, not only football, so a new panel on a weeknight in October shows the hockey, basketball and baseball games that are on. College basketball comes from the Top 25 games until you pick a team. Every 3 minutes the app's QR code comes back saying "Pick your team in the app"; on a single 64x64 panel the words and the QR code take turns.
  • When nothing is live on a panel with no team picked, the board shows the games still to come today under "Later today", each with both logos, the start time and the TV channel, and then the latest final scores for every league it follows, not only football ("Yesterday's NHL scores"). A game drops off the list once it starts.
  • When no game is left today, the "Next" card names the matchup as well as the time, like "Next: BOS at NYR Thu 6:00 PM".
  • Between seasons the board shows a clock in your team's colors instead of "No upcoming game" or "No live games" for months. Under the time is the next game once it's on the schedule, like "Next: at PHI Mar 26 7:05 PM" (in the ticker on a single 64x64 panel), or else the date. Outside football, the clock comes up once the next game is more than 10 days away, so a football bye week never shows it. A panel with no team picked shows the clock in gray.
  • After a power cut the panel waits for your router instead of asking you to fix the Wi-Fi. A panel that hasn't found its network 30 seconds after starting says "Waiting for" the network and "Just had a power cut? Routers take a few min", and only shows "Wi-Fi lost" with the app QR code after 3 minutes.
  • A panel that runs hot, in a sunny window or a closed cabinet, dims itself a step at a time instead of cooking. A small thermometer pulses slowly in its top right corner, and every two minutes the bottom line says "Too warm, dimming". It goes back to your brightness as it cools. The device page says so too, and shows the chip temperature under Diagnostics. Home Assistant gets a Chip Temperature sensor.
  • A panel that restarts twice in a row because its power dipped, as on a phone charger or a power supply too weak for it, keeps its brightness low so it stays on. A small plug pulses slowly in its top right corner, and every two minutes the bottom line says "Check power supply", until you press Clear on the device page.
  • On a bar, hotel or dorm Wi-Fi that joins and then wants you to sign in on a web page, the panel says "Wi-Fi needs sign-in, use home or a hotspot" with the QR code for the app, instead of "Can't reach ESPN" forever. The panel can't sign in to those pages, so set it up on a home network or a phone hotspot. The device page says the same, and the message goes away by itself once scores come through.
  • On a network that blocks time servers (some guest, office and school Wi-Fi), the panel now sets its clock from ESPN a few seconds after joining and shows today's games, instead of saying "Getting ready" all day. It switches to a time server's clock as soon as one answers.
  • The installer and the updates moved to install.gameday-scoreboard.com, and the setup page to app.gameday-scoreboard.com/setup, which the QR code on the panel opens. One installer now covers the Game Day Scoreboard controller and any board on the MoonHub75 pinout: pick one panel or two, then click Install. After the install, give it a few more seconds and the same window asks for your WiFi. The early test controllers on the scoreboard75 pinout have their own installer, linked from the main page.
  • The Device card on the device page has a Diagnostics section: why the panel last restarted and when (power on, restart, update, crash, froze or a power dip), any crash, freeze or power dip since it was plugged in, free memory, the Wi-Fi signal, the last read from ESPN and the firmware version and build. If the panel restarted on its own, this says why. Under Signal it draws the last day of Wi-Fi signal, says when the signal is weak, and counts Wi-Fi drops with the cause of the last one.
  • Reset Wi-Fi keeps the saved networks. The panel restarts into setup for 15 minutes so you can give it a new network; unplug it, or let the 15 minutes run out, and it goes back to the networks it already knows. The setup screen takes a turn saying "Unplug it to rejoin saved Wi-Fi". Factory Reset still erases everything.
  • The button on the controller resets Wi-Fi or the whole panel without the app or the device page, and nothing happens until you let go. Hold it: at 5 seconds the screen starts counting down, at 10 it says "Release to reset Wi-Fi", at 20 "Release to erase all" for a factory reset, and at 30 "Release to cancel". Before, a 10 second hold reset Wi-Fi while you were still holding it, and there was no factory reset on the button. Holding the button on a panel that's switched off turns it on, so you can see the countdown.
  • When the panel can't reach ESPN, the device page now says the same as the panel, and its Up next list says "Not checked yet" for a favorite the panel hasn't read yet, keeping "No game scheduled" for when ESPN says there is none.
  • In Live games, a change to the leagues, or to the favorites they follow, takes effect right away instead of leaving the old leagues' final scores up until the next check.
  • If an update crashes as it starts and the panel goes back to the firmware it had, the panel remembers that version and doesn't install it on its own again, so it no longer restarts into the same bad update every night. A later release still installs, and Install on the device page still tries it by hand.
  • When an update crashes as it starts and the panel goes back to the firmware it had, the device page says the update didn't take and which version the panel went back to.
  • Home Assistant: new Game Live, Team Score and Opponent Score entities follow the game in Game Status, and the panel fires an `esphome.gameday_score` event on every score in that game and `esphome.gameday_final` when it ends, in every sport, so an automation can flash the lights when your team scores.
  • The device page's link to an update's release notes opens that release on install.gameday-scoreboard.com/changelog.
  • Accented letters in names, like the รฉ in Atlรฉtico or the รฑ in Peรฑa, show in the pre-game ticker and the panel's other small text.

v2026.10.0

October 16, 2026

Pick a team from MLB, the NBA, the WNBA, men's college basketball, the NHL, MLS or the Premier League on the device page, and the panel follows it the way it follows football.

All 35 changes
  • Pick a team from MLB, the NBA, the WNBA, men's college basketball, the NHL, MLS or the Premier League on the device page, and the panel follows it the way it follows football.
  • Baseball shows the inning, the count, outs and the runners on a small diamond. Hockey and basketball show the period and clock, and the playoff series when there is one. Soccer shows the minute, stoppage time, the latest goal and red cards, and follows Premier League clubs into the Champions League, Europa League and Conference League and MLS clubs into the CONCACAF Champions Cup.
  • Baseball celebrates runs and home runs, and hockey and soccer celebrate goals. Basketball only celebrates the win, since a basket every few seconds would keep the screen covered.
  • Favorites hold up to 16 teams from any league, in priority order. Turn on "Only today's games" to cycle through just the favorites playing today; a new panel starts with it on. Buttons 1 to 4 on a WizMote still jump to the first four.
  • Live games replaces Live NFL, Live college and Live anything. Pick the leagues on the device page. A panel set to one of the old live modes keeps working.
  • Live games and the On now list on the device page include every Division I men's basketball game, not only the Top 25.
  • Until you pick leagues, Live games follows the leagues of your team and favorites, and the device page now says so. After you pick by hand, "Back to automatic" returns to that. When nothing is live, the page says whether the panel is showing your team or recent final scores until a game starts.
  • When two favorites play at once, a new panel alternates between them. A panel that was already set up keeps showing the higher one.
  • The ticker switches on the device page have names that fit every sport, with a line under each saying what it shows. "Down and distance" is now "Game situation".
  • Jacksonville State is JXST, ESPN's current abbreviation, in the device page's team picker and on the panel while it loads a newly picked team. It was JVST. A panel already following them keeps its team.
  • Football works the same as before.
  • New "Install updates automatically" switch on the device page and in Home Assistant, off unless you turn it on. With it on, the panel installs a new release between 3 and 5 AM, never during a live game it is showing.
  • A panel nobody has picked a team for no longer quietly follows Dallas. It shows live games, and when nothing is on, the latest final scores and when the next game starts. A panel in My team or Favorites with Dallas picked keeps it. Until you pick a team, the app QR code comes back for 13 seconds every 3 minutes.
  • When it starts up and joins Wi-Fi, every panel shows the QR code for the Game Day app, then its address, then your game. Turn off "Show how to connect when the panel starts" to go straight to the game.
  • After you set up Wi-Fi, the panel sets its clock within a second or two instead of up to a few minutes, and says "Getting ready" until then instead of "No upcoming game".
  • A panel that cannot reach ESPN says "Can't reach ESPN" instead of "No upcoming game", after a restart and after a team change. Favorites no longer sits on a blank board while reads fail.
  • A panel that can't get back on Wi-Fi restarts itself after a minute instead of ten, and never while you are setting it up from the app. If the app hands it a wrong password during an outage, it goes back to the network it had.
  • The panel remembers up to five Wi-Fi networks. Set it up on a phone hotspot for a tailgate or a bar and it still knows your home network when it gets back; it joins whichever saved network it can see, trying the last one that worked first. The device page lists them and can forget one. Reset Wi-Fi and Factory Reset still clear them all.
  • Each panel's setup hotspot has its own name, like "Game Day 2f6a70", shown on the panel's setup screen, so two panels in one house are easy to tell apart.
  • Long Wi-Fi names, and names with a curly apostrophe like an iPhone hotspot's, show correctly while the panel joins. Accented letters in names show too, instead of a box.
  • A postponed, canceled or suspended game no longer shows as Final, and a suspended game no longer gets a WINS splash.
  • A game whose kickoff time isn't set yet, like a college game two weeks out, shows "Sat TBD" instead of a made-up time like "Fri 11:00 PM", and the panel finds that game's scoreboard on the right day.
  • Bowl and playoff games show their name, like "Rose Bowl" or "NFC Wild Card", at the start of the pre-game ticker and under the score on the device page.
  • After you change teams, both logos are there when the scoreboard shows up, instead of popping in one at a time.
  • The device page works better with a screen reader. Switches say whether they are on or off, the brightness and speed sliders, menus and team search have names, and the mode, league and picker tab buttons say which one is chosen.
  • Live modes use much less data when nothing is on: the panel waits for the next kickoff instead of checking every 2 minutes. During a game it checks every 10 seconds, as often as ESPN updates, and when ESPN has trouble it waits longer between tries.
  • Home Assistant: Game Status changes when a game starts, scores or ends instead of every few seconds, and the free memory sensors read every 5 minutes instead of every 30 seconds and are off on a newly added panel, so your history grows much more slowly.
  • On the device page, quick taps on modes, leagues, favorites and switches no longer leave the page showing something the panel didn't save. In Favorite teams with no game ahead, the page says "None of your favorites has a game coming up".
  • When the panel stops answering, the device page dims the board and says "Panel not answering since 9:41 PM" instead of only turning the dot grey. Reboot says the panel is restarting and the page reconnects on its own when it's back. Reset Wi-Fi and Factory reset say the panel is restarting into setup, where this page can't follow it.
  • The device page's panel picker names the panel we ship: "One 128x64 panel", or two 64x64 side by side. Before, you had to pick "Two panels wide" for one panel.
  • Built your own? The DIY installer at gamedayscoreboard.app asks whether you have one 64x64 panel or a 128x64 (or two 64x64 side by side) and installs the matching firmware, so a two-panel build starts on the whole board.
  • The hidden demo (do=demo) is gone from the regular firmware.
  • During a game the panel asks ESPN for just that game instead of the whole day's scoreboard, about a tenth of the data it downloaded before. The device page shows how much the panel has pulled from ESPN since it started, for anyone on a capped plan.
  • The device page's header shows a GD mark instead of a football. The lines under the Live games and Favorite teams bars now name the settings that decide the behavior: Switch every, the favorites' slot order, and Alternate.
  • A team logo that will not download is asked for less and less often, instead of every 15 seconds, and a logo that ESPN refuses waits much longer. The score keeps updating as before, and the logo shows up once a request goes through.

v1.5.5

October 8, 2026

Switching games no longer freezes the panel.

All 4 changes
  • Switching games no longer freezes the panel.
  • A wrong Wi-Fi password in the app no longer leaves the panel offline.
  • A Wi-Fi drop under 10 seconds no longer shows "Wi-Fi lost".
  • The device page shows "data stale" when updates stop.

v1.5.4

October 6, 2026

A Game Day Scoreboard controller with a 128x64 panel now starts up using the whole panel.

The change
  • A Game Day Scoreboard controller with a 128x64 panel now starts up using the whole panel. Before, a freshly installed or factory-reset panel drew the picture twice side by side (two setup QR codes) until you picked the panel size. DIY builds on a 64x64 panel are unchanged.

v1.5.3

October 4, 2026

The panel has your scoreboard up sooner after a restart or an update.

All 6 changes
  • The panel has your scoreboard up sooner after a restart or an update. It no longer starts Bluetooth on every boot, which slowed down joining your Wi-Fi. Bluetooth only comes on when the panel needs setting up. This replaces the v1.5.2 change, so the panel picks your strongest Wi-Fi access point again.
  • Setting up a panel in the Game Day app, the list of Wi-Fi networks shows up right away instead of after about 10 seconds, and the panel shows the name of the network it is joining.
  • "Switch every" goes down to 1 minute, and a new panel starts at 1 minute. Choosing 1 minute no longer puts the panel back in My team the next time it restarts.
  • The panel's log no longer shows your Wi-Fi password after you set it up from the app.
  • No more gray or white bar down the right edge of the panel. It was a scrollbar that should have been turned off in v1.4.1.
  • Refresh Now works in Favorites mode. It re-reads the team on the board.

v1.5.2

October 3, 2026

The panel has your scoreboard up sooner after a restart or an update.

The change
  • The panel has your scoreboard up sooner after a restart or an update. It now rejoins the Wi-Fi access point it used last time, instead of spending about 8 seconds searching for networks first. A restart goes from about 17 seconds to about 8 before scores show.

v1.5.1

September 30, 2026

Adds firmware for the Game Day Scoreboard controller, and the installer at gamedayscoreboard.app now installs that version by default.

All 2 changes
  • Adds firmware for the Game Day Scoreboard controller, and the installer at gamedayscoreboard.app now installs that version by default.
  • Built your own panel on a MoonHub75 board? Install from the DIY installer at gamedayscoreboard.app/install/diy/ instead. Panels that are already set up keep updating over WiFi as before, each with the firmware for its own board.

v1.5.0

September 28, 2026

The panel gets to your scoreboard sooner after it starts.

All 3 changes
  • The panel gets to your scoreboard sooner after it starts. It checks for Wi-Fi and the time every half second instead of every five, and in My team it remembers your team's next game for a day, so it can skip a download on the way.
  • The start-up screen now stays up, saying "Looking up scores", until your scoreboard is ready, for up to 10 seconds. You no longer see a board of dashes with "Loading" underneath first.
  • Changing your team or the mode shows "Looking up scores" while the new game loads, instead of a half-empty board that says "Loading" or "No upcoming game".

v1.4.5

September 27, 2026

During Bluetooth setup the panel can now tell the Game Day app which Wi-Fi networks it can see, strongest first, so you can pick yours from a list instead of typing its name.

All 2 changes
  • During Bluetooth setup the panel can now tell the Game Day app which Wi-Fi networks it can see, strongest first, so you can pick yours from a list instead of typing its name. The list needs an app version that asks for it; setup works the same as before either way.
  • A panel that is not set up yet now says "Pick a team in the Game Day app or at" its address, instead of telling you to open its web page on your phone. Picking a mode or a favorite now counts as setting it up too, as does picking the team it already shows (Dallas out of the box), so the prompt goes away from the app, the page or Home Assistant.

v1.4.4

While the panel is waiting to be set up, or has lost its Wi-Fi, it now takes turns showing its message and a QR code.

All 7 changes
  • While the panel is waiting to be set up, or has lost its Wi-Fi, it now takes turns showing its message and a QR code. Point your iPhone camera at the code: it opens the Game Day app if you have it, or the setup page at gamedayscoreboard.app if you do not.
  • A panel waiting to be set up says SETUP and points you at the Game Day app again, instead of switching to the hotspot instructions half a second later. The hotspot instructions still come round in turn, for setting it up without an iPhone.
  • On two chained panels the QR code sits on the left with the words beside it, so nothing has to take turns.
  • Once a new panel joins your Wi-Fi it shows the QR code for the app instead of a fast-scrolling address. The address still takes a turn when "Show address at boot" is on, split over two lines so it stays still, and holding the boot button shows the full address for 20 seconds. A panel that already has a team shows just its address at start-up, as before, with no QR code.
  • Text on the setup screens no longer scrolls fast. The few lines that are too long to fit, like a long Wi-Fi name, now scroll slowly enough to read.
  • Holding the boot button on a panel that is not set up yet no longer blanks the screen until a restart. Off Wi-Fi, the setup and Wi-Fi lost screens now always stay up.
  • If handing the panel a new Wi-Fi password from the app fails, a panel that lost its Wi-Fi keeps saying so, instead of switching to the hotspot instructions.

v1.4.3

September 23, 2026

The firmware no longer names a specific controller board.

The change
  • The firmware no longer names a specific controller board. It runs on any ESP32-S3 HUB75 controller wired to the MoonHub75 pinout, and the update manifest moved to firmware/moonhub75/. Panels on v1.4.2 or older will not see this update by themselves: install once over USB from gamedayscoreboard.app and updates resume from there.

v1.4.2

September 22, 2026

The panel now checks gamedayscoreboard.app for firmware updates instead of the old GitHub Pages address.

All 2 changes
  • The panel now checks gamedayscoreboard.app for firmware updates instead of the old GitHub Pages address.
  • New setup, privacy and support pages at gamedayscoreboard.app.

v1.4.1

September 22, 2026

The panel lights up whenever it has power.

All 5 changes
  • The panel lights up whenever it has power. It no longer comes back dark because it happened to be off when the power went out.
  • Turning the panel back on redraws the whole board. It used to return with only the ticker moving and the score, logos and clock still black.
  • Changing the team or the mode turns the panel on, from the page, the app or Home Assistant. So do the four favorite buttons, and brightness up and night, on the remote.
  • One consequence of always lighting up: a panel you switched off comes back on after a firmware update, and after the restart it does when it cannot find its Wi-Fi.
  • A team logo that fails to download is asked for again a few seconds later, instead of leaving an empty square until you change teams.

v1.4.0

September 14, 2026

The panel now says "Wi-Fi lost, open the Game Day app" instead of leaving an old score on the screen, and Bluetooth switches back on so the app can hand it a new password.

All 8 changes
  • The panel now says "Wi-Fi lost, open the Game Day app" instead of leaving an old score on the screen, and Bluetooth switches back on so the app can hand it a new password. A panel that cannot get back on Wi-Fi restarts itself after ten minutes.
  • When scores stop updating the ticker says how long it has been since the last one, instead of a bare asterisk that meant nothing.
  • A college team in a favorite slot now finds its games. It was asking the NFL scoreboard.
  • The boot screen shows an address you can actually type, and holding the boot button warns you before it erases your Wi-Fi, with five seconds to let go.
  • "Switch every" can be set as low as 1 minute.
  • After a game ends the panel moves on to the next one instead of sitting on a final, even when ESPN keeps reporting the finished game.
  • The live modes show your team instead of an empty board when no game is on, and go back to live games the moment one starts.
  • Refresh Now re-reads the schedule instead of only re-polling the game already on the board, so a game that moved, was postponed or has finished shows up as soon as you press it. For the first six hours after a restart the button did nothing at all.

v1.3.8

September 11, 2026

After connecting, the panel points at the Game Day app first and shows its address as the fallback.

The change
  • After connecting, the panel points at the Game Day app first and shows its address as the fallback. Holding the boot button still shows the address.

v1.3.7

September 11, 2026

Fixes the restart loop from v1.3.0 onwards.

The change
  • Fixes the restart loop from v1.3.0 onwards. Bluetooth now runs only while the panel has no Wi-Fi (first setup, or after Reset Wi-Fi) and switches off once it is connected, so scores and updates have their memory back.

v1.3.5

September 11, 2026

The panel shows "Setup, open the Game Day app" while it waits to be set up over Bluetooth, and "Joining Wi-Fi" while it connects, instead of sitting on the boot screen.

v1.3.4

September 11, 2026

Fixes panels restarting every minute after the Bluetooth update.

The change
  • Fixes panels restarting every minute after the Bluetooth update. Bluetooth and secure-connection buffers now live in the larger PSRAM, so score fetches and update checks have room again.

v1.3.3

After Reset Wi-Fi (button or the 10 second boot hold), the panel now offers its hotspot and Bluetooth setup within a second of restarting instead of a minute later.

v1.3.2

September 11, 2026

Hold the boot button for 10 seconds to reset Wi-Fi.

The change
  • Hold the boot button for 10 seconds to reset Wi-Fi. The panel forgets its network and restarts into setup mode; team, favorites and the rest of your settings stay. Shorter holds still show the page address.

v1.3.1

September 11, 2026

Reset Wi-Fi button on the page and in Home Assistant.

All 2 changes
  • Reset Wi-Fi button on the page and in Home Assistant. The panel forgets its network, restarts, and waits for setup from the app over Bluetooth or through its hotspot.
  • Factory reset button. Erases everything the panel remembers, including the team and favorites, then restarts.

v1.3.0

September 11, 2026

Set up Wi-Fi from your phone over Bluetooth.

The change
  • Set up Wi-Fi from your phone over Bluetooth. The panel advertises while it has no network; the Game Day iPhone app finds it and sends your Wi-Fi details. The hotspot and captive portal still work as before.

v1.2.0

September 10, 2026

New "Favorite teams" mode.

All 6 changes
  • New "Favorite teams" mode. Set up to four favorites on the page (the same slots the remote buttons use), and the panel cycles through their next games. When one of them is about to kick off, the panel locks onto that game and follows it like My team does, then goes back to cycling after the final.
  • Lock-on time (default 15 minutes before kickoff) and how long the final stays up (default 30 seconds) are adjustable from the page.
  • Two favorites playing at once: the panel sticks with the one higher in your list, or alternates between them if you prefer.
  • The Favorites card has arrows to reorder the slots. In Favorite teams mode the order is the priority.
  • Up next lists every favorite's next game while this mode is on.
  • A WizMote button press in this mode jumps to that favorite and stays in the mode.

v1.1.6

September 9, 2026

Installer page and README no longer name browsers.

The change
  • Installer page and README no longer name browsers. No change to the firmware.

v1.1.5

September 9, 2026

Installer page wording under the demo video.

The change
  • Installer page wording under the demo video. No change to the firmware.

v1.1.4

September 9, 2026

The installer page plays the demo, and the README shows a touchdown, so you can see what you're getting before you flash.

The change
  • The installer page plays the demo, and the README shows a touchdown, so you can see what you're getting before you flash. No change to the firmware itself.

v1.1.3

September 9, 2026

The device page no longer offers to install a version older than the one running (the panel treats any different version as an update; the page now checks which way).

All 2 changes
  • The device page no longer offers to install a version older than the one running (the panel treats any different version as an update; the page now checks which way).
  • The Discovery toggle in the Remote card no longer picks up a phone browser's default button styling.

v1.1.2

September 9, 2026

The device page's cards flow in two columns with no gaps: a short card no longer leaves a hole beside a tall one.

v1.1.1

September 9, 2026

The possession marker is a gold underline under the team with the ball (under the score on a single panel), so it visibly jumps from one side to the other.

The change
  • The possession marker is a gold underline under the team with the ball (under the score on a single panel), so it visibly jumps from one side to the other. The first cut of it was two dots in the middle that barely moved.

v1.1.0

September 9, 2026

Fireworks.

All 2 changes
  • Fireworks. Touchdowns and the win now set off fireworks on the panel behind the splash text, in the team's color. Field goals and extra points keep the quick color flash.
  • Possession is a gold underline under the team with the ball. Team names stay in their own colors instead of turning gold, which read like the teams had swapped.

v1.0.1

September 9, 2026

The firmware box shows the version that's actually running after an update, without a manual refresh.

All 2 changes
  • The firmware box shows the version that's actually running after an update, without a manual refresh.
  • Cards on the device page no longer stretch to match their neighbour, so Remote is as tall as its contents.

v1.0.0

September 9, 2026

First full release.

All 4 changes
  • First full release. One firmware for one or two panels, installed from the browser, with the team, layout and every other setting on the panel's own page. No Home Assistant needed.
  • Next-game card with the line, TV and kickoff; live scoreboard with clock, down and distance, possession and timeouts; full-screen celebrations; a final that lingers, then the next game.
  • Device page: mirrors the panel and its celebrations, lists the next three games, holds favorites for a WizMote remote, live modes that follow any game in progress, and updates the firmware over WiFi.
  • Since v0.8.4: the installer pins its loader with an integrity hash and describes the current setup flow; the firmware box no longer reads "unknown" after a reboot (the first update check ran before the clock was set); Check for updates stays quiet during an install.

v0.8.4

September 9, 2026

A Setup card gathers the things you set once: the matrix pictures, the timezone, and the startup line, now labelled "Show the page address when the panel starts" with a note on what it does.

The change
  • A Setup card gathers the things you set once: the matrix pictures, the timezone, and the startup line, now labelled "Show the page address when the panel starts" with a note on what it does. Device is back to firmware, refresh, reboot and diagnostics.

v0.8.3

September 9, 2026

The mode picker is a row of buttons above the team bar: My team, Live NFL, Live college, Any live game.

All 3 changes
  • The mode picker is a row of buttons above the team bar: My team, Live NFL, Live college, Any live game. In a live mode the team bar becomes a one-line explanation with a small "switch every N min" field instead of the big slider.
  • Hidden things on the page now stay hidden. A styling slip let some hidden rows show anyway, which is why the rotation slider was always there.
  • Release notes on the device page are a bullet list again instead of one run-on paragraph. The page fetches the full notes from GitHub when it can and falls back to the short summary in the manifest.

v0.8.2

September 9, 2026

The board fills in right after boot again.

All 4 changes
  • The board fills in right after boot again. Since v0.8.0 the season schedule for "Up next" was downloaded before the game, which held the board on "Loading" for up to half a minute. The game comes first now and the list follows a moment later.
  • The page reloads itself after an install again. It was waiting for a version field the device no longer sends in the plain state, so it sat on "Installing" after the panel had already rebooted.
  • A hidden demo for showing the panel off without a live game: POST /gameday/action?do=demo plays a scripted game with real splashes for about 50 seconds, then live data resumes.
  • The "Preview setup screen" button is gone from the device page. The boot button still shows the address on a long press.

v0.8.1

September 8, 2026

Ready for ESPHome 2026.9: the timezone picker and the "Connecting to" screen use the new APIs, and the firmware still builds on 2026.8.

The change
  • Ready for ESPHome 2026.9: the timezone picker and the "Connecting to" screen use the new APIs, and the firmware still builds on 2026.8. No visible change.

v0.8.0

September 8, 2026

"Up next" on the device page: the three games after the one on the board, with the opponent's logo, home or away, kickoff in your timezone and the TV network when ESPN lists one.

All 2 changes
  • "Up next" on the device page: the three games after the one on the board, with the opponent's logo, home or away, kickoff in your timezone and the TV network when ESPN lists one. Refreshes with the schedule every 6 hours.
  • The page now celebrates too. When the panel splashes a score, the same text flashes over the board on the page in the team's color.

v0.7.2

September 8, 2026

The Power switch and Brightness now take effect at boot.

The change
  • The Power switch and Brightness now take effect at boot. A panel that was switched off before a power cycle came back lit at a default brightness with the page showing it off, and turning it on jumped to your brightness setting. Both are applied as soon as the display starts.

v0.7.1

September 8, 2026

A panel that already has a team no longer sits on the setup screen for 45 seconds after every boot.

All 2 changes
  • A panel that already has a team no longer sits on the setup screen for 45 seconds after every boot. It shows its address for 3 seconds and goes straight to the scoreboard. A new panel keeps the long setup screen, and it disappears the moment a team is picked.
  • New "Show address at boot" toggle on the Device card, for skipping even the 3 seconds.

v0.7.0

September 8, 2026

The device page talks to the scoreboard directly instead of going through Home Assistant style entities, so it is faster to react and no longer limited by the 255-character cap those entities had.

All 2 changes
  • The device page talks to the scoreboard directly instead of going through Home Assistant style entities, so it is faster to react and no longer limited by the 255-character cap those entities had. Nothing looks different; team changes, favorites, timezone and toggles all land the same way.
  • Slimmer in Home Assistant: the page-only settings (favorites, timezone, ticker toggles, opponent splashes, rotation, panel count, preview button, the raw Game sensor) no longer appear as entities. Team, Mode, Power, Brightness, Scroll Speed, Select Page, Game Status, Last Play, Firmware, Refresh Now, Reboot and the WizMote switches stay.

v0.6.0

September 8, 2026

One firmware for both layouts.

All 3 changes
  • One firmware for both layouts. The installer has a single Install button, and a Panels card on the device page shows two pictures: click the one that matches your matrix (one 64x64 panel, or two side by side) and the panel restarts using it. A fresh install starts on one panel, so the setup screen is readable on any matrix.
  • If you were on the two-panel build before this update, the panel comes up on the left panel only until you click the two-panel picture once. It remembers after that.
  • Team logos use ESPHome's current image platform (no change on the panel, just quieter builds).

v0.5.3

September 8, 2026

The network name is gameday-xxxxxx.local again, with the panel's own six-character suffix, so two panels on one network never collide.

All 2 changes
  • The network name is gameday-xxxxxx.local again, with the panel's own six-character suffix, so two panels on one network never collide. The setup screen and the ticker hint show the exact name.
  • Check for updates no longer pops a message when there's nothing new; the firmware row says so.

v0.5.2

September 8, 2026

The panel is now reachable at gameday.local (no more six-character suffix in the name).

All 2 changes
  • The panel is now reachable at gameday.local (no more six-character suffix in the name).
  • The setup screen reads like instructions: "On your phone, open gameday.local, or 10.10.10.97, then pick your team", and the hotspot screen says a setup page will open after joining. The ticker hint says the same until a team is picked.

v0.5.1

September 8, 2026

The setup screen shows the address itself in the larger font ("http://10.10.10.97", or just the address on a single panel) with "pick your team here" under it, so nothing important scrolls.

All 2 changes
  • The setup screen shows the address itself in the larger font ("http://10.10.10.97", or just the address on a single panel) with "pick your team here" under it, so nothing important scrolls.
  • A "Preview setup screen" button on the Device card plays the three setup screens on the panel (hotspot, connecting, address) without touching WiFi.

v0.5.0

September 8, 2026

Check for updates now answers.

All 4 changes
  • Check for updates now answers. The button reads "Checking" for a few seconds and then the page says "You're up to date" or "Update available", instead of quietly doing nothing when there's no newer version.
  • A real setup screen at boot. It says "Join WiFi: Game Day Scoreboard" while the hotspot is up, "Connecting" with the network name once credentials are saved, and "Open http://<address> to pick your team" for 30 seconds once it's on WiFi, with a progress bar while it works.
  • Until a team has been picked once, the ticker starts with "Setup: http://<address>" so a new panel tells you where its page is.
  • Hold the controller's boot button for 1.5 seconds and the address screen comes back for 15 seconds.

v0.4.3

September 6, 2026

The clock on the panel now comes from ESPN's raw clock and period instead of their pre-formatted text, which lagged a poll or two behind the down and distance.

The change
  • The clock on the panel now comes from ESPN's raw clock and period instead of their pre-formatted text, which lagged a poll or two behind the down and distance. Everything on the board updates together.

v0.4.2

September 6, 2026

Switching teams is fast now.

All 2 changes
  • Switching teams is fast now. The panel shows the new team's name and logo immediately and fills in the game a second later, and the old opponent's logo clears instead of lingering.
  • Logos come from ESPN already shrunk to 64 pixels (about 3KB instead of up to 95KB), so they load in well under a second and no longer stall the display while decoding.

v0.4.1

September 6, 2026

After an update from the device page, the page reloads within a few seconds of the panel coming back instead of up to 45 seconds later.

The change
  • After an update from the device page, the page reloads within a few seconds of the panel coming back instead of up to 45 seconds later. It now watches the running version number rather than waiting to see the connection drop.

v0.4.0

September 6, 2026

WizMote remote support.

All 2 changes
  • WizMote remote support. Turn on discovery in the Remote card, press any button on the remote, and it's paired. ON and OFF control the panel, the brightness buttons work, NIGHT dims it.
  • Four favorite teams. Set them in the Favorites card; buttons 1 to 4 on the remote switch the panel to that team (and back to My team mode if it was showing live games).

v0.3.0

September 6, 2026

Live game modes.

All 3 changes
  • Live game modes. A new Show dropdown on the device page: My team, Live NFL, Live college, or Live anything. In a live mode the panel picks a game in progress at random, follows it, and jumps to another when it ends or when the "switch games every" timer runs out (2 to 30 minutes, default 5).
  • In live modes both teams get scoring splashes with their abbreviation, and the winner gets the final splash.
  • The device page uses the width of the screen: bigger board and side-by-side settings on desktop.

v0.2.5

September 6, 2026

After installing an update from the device page, the page now reloads itself as soon as the panel is back, instead of waiting on the slow reconnect.

All 2 changes
  • After installing an update from the device page, the page now reloads itself as soon as the panel is back, instead of waiting on the slow reconnect.
  • The Time card is one line: the zone the panel is using and where it came from. The dropdown only appears if you ask to choose manually.

v0.2.4

September 6, 2026

The timezone now sets itself from whatever browser opens the device page.

All 3 changes
  • The timezone now sets itself from whatever browser opens the device page. Picking a zone by hand turns that off so your choice sticks; the "Set from this browser" toggle in the Time card turns it back on.
  • Shorter timezone list (US, Canada, Mexico, UK, Central Europe, Australia, UTC) and the stray "Display name" entry is gone.
  • Removed the "Game clock in the ticker" toggle. The clock has its own row on the panel.

v0.2.3

September 6, 2026

A proper timezone list: all of North America plus the common zones worldwide.

All 3 changes
  • A proper timezone list: all of North America plus the common zones worldwide.
  • The device page notices the timezone your browser is in and offers it with one tap when the panel is set to something else.
  • The Team and Timezone dropdowns show their real values after a reboot. A code-generation slip had wired the stored team into the Timezone dropdown and left Team blank, so the page said "No team chosen" even though the panel was following the right team.

v0.2.2

September 6, 2026

Fixed every control on the device page.

All 4 changes
  • Fixed every control on the device page. ESPHome 2026.8 changed how its web server names entities, so team changes and toggles were silently failing with a 404. They work now.
  • Over-the-air updates. The panel checks this project's releases every six hours. When a newer version exists, the Device card shows an Install button and the update runs over WiFi.
  • Added a Check for Updates button.
  • Every HTTPS request, including firmware downloads, is now certificate-verified.

v0.2.1

September 6, 2026

The team chooser has an "On now" tab: today's NFL and FBS games straight from ESPN, live games first.

All 2 changes
  • The team chooser has an "On now" tab: today's NFL and FBS games straight from ESPN, live games first. Tap the side you want to follow.
  • Control requests from the page retry once and report the HTTP status if they fail.

v0.2.0

September 5, 2026

New device web page: a live board that mirrors the panel, a team chooser with logos and search, and settings grouped in plain language.

All 2 changes
  • New device web page: a live board that mirrors the panel, a team chooser with logos and search, and settings grouped in plain language. Replaces the stock ESPHome entity list.
  • The stored team and timezone are published again after the network comes up so the page shows the right values after a reboot.

v0.1.3

September 5, 2026

Kept the game clock on one line.

The change
  • Kept the game clock on one line. "12:34 - 2nd" was wrapping onto the down and distance row.

v0.1.2

September 5, 2026

ESPN is polled every 5 seconds during a game.

All 3 changes
  • ESPN is polled every 5 seconds during a game.
  • Two-panel layout: down and distance under the clock (red in the red zone), records under the logos, abbreviations in team colors with the team holding the ball in gold.
  • The ticker sits on the very bottom row with a clear gap above it.

v0.1.1

September 5, 2026

Game clock and quarter shown in large type under the scores during the game.

All 5 changes
  • Game clock and quarter shown in large type under the scores during the game.
  • Fetching moved to its own task so the ticker keeps scrolling during downloads.
  • Polling every 10 seconds during a game.
  • No more reboot after 15 minutes without a Home Assistant connection.
  • College teams labelled NCAAF in the team list.

v0.1.0

September 5, 2026

First release.

The change
  • First release. Standalone football scoreboard for HUB75 LED matrix panels: flash from the browser, join WiFi, pick a team on the device page, and the panel follows the game from ESPN with no Home Assistant needed.